Overview
A slip resistant, hardwearing paint ideal for exterior brick, stone and concrete steps. Give your home curb appeal and have your front door looking spic and span with this easy to use paint. The diamond hard formulation will not scuff or scratch to keep it looking fresher for longer.
- Slip resistant, durable formulation
- No need for a primer
- Will not scuff or scratch
- Satin finish
| Area | Exterior |
| Recommended Use | Brick, concrete or stone steps |
| Base | Water Based |
| Coverage | Up to 12m² per litre |
| Drying Time | 4-6 for foot traffic, 24 hours fully hardened |
| Re-Coat Time | 4-6 hours |
| Recommended Coats | 2 coats |
| Application Method | Brush |
| VOC Levels | Medium |
Preparation
Make sure surfaces are clean, dry and free from dust and grease.
- Remove any debris such as twigs, leaves and moss by sweeping with a brush.
- Wash with warm, soapy water and leave to dry.
- If the steps have been previously painted use a wire brush to remove any loose or flaking paint and wipe down with white spirit.
Application
We recommend performing a test on the area to be painted to ensure compatibility, always follow the manufacturer's instructions found on the packaging.
- Stir the paint well to ensure the pigment is thoroughly mixed.
- Use a brush to apply the first coat and leave for 4-6 hours to dry.
- Apply the second coat, allow to dry for 4-6 hours before walking on them.
- After 24 hours it will be completely dry.
Aftercare & Storage
Cleaning
To keep your step looking as good as new, clear up any moss, leaves or twigs.
