Overview
Dulux Once Satinwood in Pure Brilliant White is a paint specially formulated to give a lovely satin finish to primed or painted interior wood and metal surfaces with one coat. There's no need to apply an undercoat and it has excellent coverage.
- Just one coat needed
- No undercoat required
- Excellent coverage
| Area | Interior |
| Recommended Use | Doors, Door Frames, Metal, Skirting Boards, Window Frame, Wood |
| Base | Solvent Based |
| Coverage | Up to 12m² per Litre |
| Drying Time | 4-6 Hours |
| Re-Coat Time | 16 Hours |
| Recommended Coats | 1 Coat |
| Application Method | Brush |
| VOC Levels | High |
| Clean Up | For best results, scrape off excess paint from the brush and clean with Osmo Brush Cleaner |
Preparation
Remove flaking or defective paint and sand the surface down to remove any existing sheen. Refer to health and safety and environmental information.
- Make sure that the surface is clean, dry, and free from dirt and grease.
- If you're intending to paint a bare surface, apply a primer.
- Treat any wood knots with a .
- Repair any damaged surfaces with an appropriate .
Application
Firstly, stir thoroughly to ensure that the paint is mixed completely and test a small area to be sure you’re happy with the finish
- Apply a thick, even coat of paint using a clean, good quality brush.
- Be sure not to spread it too far. Failure to do so may mean that a second coat is needed, especially when painting over a darker colour with a lighter paint.
- Leave a minimum of 16 hours if you do need a second coat.
Aftercare & Storage
Newly painted doors and windows should not be closed. Store paint in dry conditions and protect from extreme temperatures.
